Flush-mounted home automation actuator with 1 controlled circuit and 2 wired inputs

The built-in home automation actuator is a versatile device that allows you to control various types of loads, such as incandescent lamps, LED lamps, CFL lamps, FL lamps and resistance cookers. This actuator is compatible with all commands of the DOMO myLife system and can be managed and controlled via iOS and Android mobile devices (tablet and smartphone) with the D myLife app.
The actuator has one output channel (230V∞ voltage output) and the status of the actuator can be viewed in the D myLife app. It is possible to program the state of the output after a drop in the supply voltage. Furthermore, the actuator can be controlled via up to 2 conventional command devices (buttons, switches).
The actuator has 4 operating modes when activated by commands (on/off, bistable, monostable, timed) and 2 operating modes when controlled by the D myLife app (on/off, timed). You can configure 4 preferred light intensity levels (comfort levels) via the app.
The actuator has an encrypted RF transmission and a long operating range (up to 330m in open areas). It is powered by 230V∞ and can be installed in junction boxes. In summary, the built-in home automation actuator is a flexible device that offers many control options for various types of loads.

Characteristics
· compatible with all controls of the DOMO myLife system
· management and control via iOS and Android mobile devices
(tablet and smartphone) with the D myLife app
· status of the actuator displayed in the D myLife app
· 1 output channel (230V∞ voltage output)
· state of the programmable output
after a drop in the supply voltage
· control of the actuator via up to 2 traditional command devices (buttons, switches)
· 4 operating modes
when activated by commands
(turn on/off, bistable, monostable, timed)
· 2 modes of operation when commanded
from the D myLife app (on/off, timed)
· encrypted RF transmission
· long operational range (up to 330 m in open areas)
· 230V∞ power supply
· installation in junction boxes

Loads supported:
· incandescent lamps (AC5b) max 750W
· max 60W LED lamps
· CFL lamps (AC5a) max 250W
· FL lamps (AC5a) min 375W max 500W
· non or slightly inductive loads,
resistance ovens (AC1) max 1250VA