• New
Flush-mounted home automation actuator for 1...
Flush-mounted home automation actuator for 1...
Flush-mounted home automation actuator for 1...
Flush-mounted home automation actuator for 1...
Flush-mounted home automation actuator for 1 motorized device with 2 wired 230V inputs
Flush-mounted home automation actuator for 1 motorized device with 2 wired 230V inputs
Flush-mounted home automation actuator for 1 motorized device with 2 wired 230V inputs
Flush-mounted home automation actuator for 1 motorized device with 2 wired 230V inputs

Flush-mounted home automation actuator for 1 motorized device with 2 wired 230V inputs

ECL5022
€60.56
Tax included
The built-in home automation actuator for 1 motorized device with 2 wired inputs is a device compatible with all commands of the DOMO myLife system and allows management and control from iOS and Android mobile devices. With this device, it is possible to control a motorized device via up to 1 conventional command device. Furthermore, the actuator allows you to automatically and manually configure the closing and opening times of the motorized device.

Description

The built-in home automation actuator for 1 motorized device with 2 wired inputs is an automation device compatible with all the commands of the DOMO myLife system. This device allows management and control from iOS and Android mobile devices (tablets and smartphones) via the D myLife app. The actuator allows you to view the status of the actuator and the current position of the motorized device in the D myLife app.
This device is designed to control rolling shutters or other devices operated with a 230V∞ single-phase motor. The actuator has 2 wired 230V∞ inputs to allow control of the motorized device via a maximum of 1 traditional control device (double button, switch).
The actuator has 2 operating modes when activated by commands (local/central) and 3 operating modes when controlled by the D myLife app (open/close/stop, % closure, comfort). In addition, the actuator allows you to configure 4 preferred locking levels (comfort levels) via the D myLife app and 2 preferred locking levels via controls and command devices.
The actuator has a programmable output after power failure and an automatic and manual configuration of the closing and opening times of the motorized device.
The actuator is powered at 230V∞ and supports a maximum load of 350W (2A) - class AC3. Encrypted RF transmission enables a long operating range of up to 330m in open areas. The actuator can be installed in junction boxes for discreet and secure installation.

Characteristics
· compatible with all controls of the DOMO myLife system
· management and control from iOS and Android mobile devices
(tablet and smartphone) with the D myLife app
· status of the actuator and current position of the device
motorized displayed in the D myLife app
· shutter control or other devices
operated with single-phase 230V∞ motor
· state of the programmable output
after a drop in the supply voltage
· automatic and manual configuration
of the closing and opening times of the motorized device
· control of the actuator via a maximum of 1 traditional command device (double button, switch)
· 2 modes of operation when activated
from commands (local/central)
· 3 modes of operation when controlled by the app
D myLife (open/close/stop, % close, comfort)
· possibility of con?guring 4 preferred locking levels
(comfort levels) via App
· possibility of con?guring 2 preferred closing levels
(comfort levels) via controls and switchgear
· 230V∞ power supply
· encrypted RF transmission
· long operational range (up to 330 m in open areas)
· installation in junction boxes
· maximum load 350 W (2 A) - class AC3

Product Details

New

Reviews (0)

No reviews

3 other products in the same category:

Product added to wishlist
Product added to compare.

iqitcookielaw - module, put here your own cookie law text